After reading Dino's thread about "Revisiting AF3/RAF," I was inspired to revisit an old favorite system of mine, DWM2, and see if it can be improved. I then realized that the method Mark made for my then-favorite system, Flexible Autofocus, could just be easily used for DWM2. After improving DWM2 based on the principles outlined by Mark Forster in "The Natural Selection of Tasks", which incidentally removed most of the problems of DWM2, and combining it with the method of FAF, I came up with the system I could call "Flexible Day, Two-Weeks, Month" or FD2WM.
It has been a week since I started using it without further tweaks, the bare minimum time I gave myself to try this system before I publish it here. It theoretically would be actually better to test it for a week more just to see how the dismissal works (see below) but there are actually no more recurrent tasks more than five days old so I thought today will be as good as any unless I want to wait for two or even three more weeks.
As such, this system is well into the early stage of testing, but I have stress-tested it by starting it with my previous list. For now it is working well, and I present it here for others who may want to try it out.
Here are the steps as I use them, followed by discussions about the rationale of the steps. You will need a pen and notebook or paper pad.
1. Have one continuous list of tasks as in Autofocus.
2. Newly entered tasks are written with no marks before it.
3. Re-written tasks that ought to be done within two weeks are marked with a dot •.
4. Re-written tasks that ought to be done more than two weeks from now but less than 31 days are not marked, but dates indicating when they ought to be done (if needed) can be written beside them. Any other recurrent tasks that need to be done more than 31 days from now should be added to a calendar.
5. Daily obligatory or daily initiative tasks (DOITs) may be added enclosed in /virgules, also known as slashes/.
6. At the beginning of each day, leave a blank line and write on the next line a label using the recurring series A-N and 1-31, for example H24. Since you will only number days when you are actually working on the list, this automatically allows for days when you are not using the list without needing any complicated adjustments.
7. Delete all tasks of the previous day with the same NUMBER as today.
8. Delete all dotted • tasks of the previous day with the same LETTER as today.
9. Delete all tasks /enclosed in virgules/ yesterday.
10. Scan down the list, ignoring the dividing lines, until you come into a task that stands out as ready to be done. Mark with a angle bracket > and do it, then cross out and, if needed, re-write at the end of the list per the rules outlined above (steps 3 and 4), or as a DOIT (step 5) if you feel you need to be reminded to go back to it today.
11. You are now "trapped": repeatedly scan for and do tasks that stand out in the same "day" you found the previous task that stood out.
12. Once no other tasks stand out in that "day," you are "free" to scan the rest of the list until you get "trapped" again.
Discussions
1. MONTH: The 31-day deletion is the part that is least changed from DWM/DWM2, I just added one more day to the previous thirty.
Pruning the list of tasks more than a month old is a relaxed way of keeping it relevant, satisfying "The Natural Selection of Tasks" criteria of "pure housekeeping" and "no pressure" on tasks. It can, however, result in a long scattered list. Nevertheless, the "Flexible" part of the system should have this "list bloat" controlled. Also, one can always prune old tasks that are less than a month old if needed or wanted.
Tip: If you want to use a pre-existing list, you can divide it using lines into "days" each containing 20 or so active tasks.
2. TWO-WEEKS: Many (including myself) had complained that one week deletion is too "blunt" an instrument for some recurrent tasks. It seems reasonable then to just double the number of days to two weeks before deletion for most recurrent tasks and just exclude the rest of the recurrent tasks that have too many days in between doing them. This again satisfies "The Natural Selection of Tasks" criterion of lessening pressure to do tasks.
3. DAY: The Daily Obligatory/Initiative Tasks (DOITs) labelled with virgules is a completely new mechanic which personally gives me a sense of closure I have never felt before with other systems. These tasks have to be done today, and will be deleted the next day if not done.
Many have felt the need for a "daily dashboard" of their most important things to do today. Some need a reminder for finishing a task they had to leave unfinished some time ago. Others need a reminder of an upcoming event later that day. DOITs can fulfill these and other functions.
Per "The Natural Selection of Tasks", DOITs should not imply any commitment: they are either reminders for scheduled events, tasks that you would do even if they are not listed anywhere, or things that you really want to do. As such, DOITs are the least essential parts of the FD2WM and the system will still function without using them.
Tip: Nevertheless their non-essential characteristic, do not underestimate using rewards or mundane scheduled events such as mealtimes, relaxation periods, and sleep times as DOITs. The most satisfying act I have ever had from a time management system is to mark /Sleep/ at the end of the day.
4. FLEXIBLE: I have noted many times before that, because of its dismissal structure, one can be extremely flexible in processing a DWM2 list. One can use the processing method of AF1, AF2, AF3, RAF, Randomizer, FV, or others on it, and they can be used also on this iteration of the system without any problems. However, the method outlined in Flexible Autofocus fits the structures of DWM2 and FD2WM so well that I consider it the "default" processing mode for these systems.
Advantages of using the FAF method on FD2WM and DWM2:
a) It is a fast way of processing the list which handles "list bloat" very well.
b) The "clumping effect" noted on tasks of similar priority and/or time requirement in FAF becomes more pronounced in DWM2 and FD2WM since each "page" is a group of tasks entered on the same day.
c) The clumping effect is so pronounced that I have been using FD2WM to make and establish new habits.
Tip: Try starting the day from yesterday's task list. I found this to be amazing in establishing a morning routine.
5. FD2WM: I remember people complaining about DWM2 as a hammer that tries to do all the work of other tools. FD2WM, on the other hand, feels like a toolkit that can handle multiple types of and circumstances for tasks.
The system's characteristics for me overall are:
a) It is a system that cleans itself up because of its time-based dismissal, yet is lenient and does not put undue pressure on doing tasks because of the generous deadlines. This is especially seen in its handling of recurrent tasks compared to DWM and DWM2.
b) It demonstrates a good synergy of the principles of "list-all" and the "no-list" with the DOITs.
c) The clumping effect is so good it encourages the user to do the "have to's" early so they can focus on the "want to's" right after.
e) The clumping effect is also surprisingly effective in establishing new habits.
f) The feeling of closure that I get from marking a mundane scheduled DOIT like /brunch/, /dinner/, and /sleep/ is something I have never felt before from other systems. It is the feeling of choosing to wind down because I have done what I can do for now. It is frankly amazing.
g) It seems to still have the disadvantage of "list bloat" since it is so lenient in dismissing tasks, but this is handled well by the "Flexible AF" method and by manual pruning of tasks every once in a while. We will see if this still is the case a few weeks from now.
Reference links
Dino's thread about "Revisiting AF3/RAF"
http://markforster.squarespace.com/forum/post/2676829DWM
http://www.markforster.net/blog/2010/2/1/dit2-af5-who-cares-what-its-called-this-is-what-im-working-o.htmlDWM2
http://www.markforster.net/blog/2010/10/26/my-favourite-time-management-system.html#comment10307721Mark Forster's Reviews of DWM and DWM2
http://markforster.squarespace.com/blog/2011/1/26/review-of-the-systems-dwm-day-week-month.htmlhttp://www.markforster.net/blog/2011/1/27/review-of-the-systems-dwm-day-week-month-2.htmlFlexible Autofocus
http://markforster.squarespace.com/blog/2017/1/9/flexible-autofocus.html"The Natural Selection of Tasks"
http://markforster.squarespace.com/blog/2017/2/6/the-natural-selection-of-tasks.htmlLabeling days in DWM2
http://markforster.squarespace.com/blog/2010/10/26/my-favourite-time-management-system.html#comment10317092FAF's Clumping Effect
http://markforster.squarespace.com/forum/post/2653333#post2653755